Customer Checklist - Application for Certification The following information is required to apply for a Certification according to ASME A17.7/ CSA B44.7: Elevator Systems 1. 2. According to ASME A17.7/CSA B44.7 Mandatory Appendi x I-4 your application shall include the following: A written declaration that the same application has not been submitted to any other AECO, or a written explanation as to why the application is being subm itted to another AECO. Name and address of the applicant / authorized repr esentative and the place of manufacture. Elevator Systems 3. 3.1. a) description of the equipment b) a description of a particular elevator system, su b-system, component, or function to which this Code is being applied Technical documentation: explanation as to why the application is being subm itted to another AECO. Code Compliance Document which includes the followi ng: being applied c) a deviation list of ASME A17.1/CSA B44 Parts, Sec tions, or requirements that have been addressed by compliance with ASME A17.7/CSA B44.7 d) technical documentation to demonstrate conformity a nd enable verification of conformance e) a list of applicable GESRs f) the risk assessment report with name and expertise of team members and the date of completion of f) the risk assessment report with name and expertise of team members and the date of completion of the risk assessment processes g) procedures for acceptance inspections and tests to verify conformance with the CCD h) procedures for tests, periodic inspections, maint enance, replacements, adjustments, and repairs to b e incorporated into and made a part of the Maintenanc e Control Program (MCP) required by ASME A17.1/CSA B44, requirement 8.6.1.2.1 3.2. A general description of the elevator system under examination, indicating all possible extensions to it 3.2. 3.3. 3.4. 3.5. 3.6. Steps taken at the installation stage to ensure the conformity to the requirements of this ASME Results of any tests or calculations A list of GESRs taken into consideration and the me ans adopted to conform. Technical drawings and/or diagrams A general description of the elevator system under examination, indicatin 3.3. 3.4. 3.5. 3.6. Steps taken at the installation stage to ensure the conformity to the requirements of this ASME Results of any tests or calculations A list of GESRs taken into consideration and the me ans adopted to conform. Technical drawings and/or diagrams A general description of the elevator system under examination, indicating all possible extensions to it (specification of the variations between the model elevator and the installed elevators). 3.6. 4. Details of the location where the elevator system can be examined. The elevator system submitted for examination and certification shall include all par ts and be capable of serving at least three levels (top, middle and bottom) unless the system is specifically limit ed in scope to a two-stop application. Steps taken at the installation stage to ensure the conformity to the requirements of this ASME A17.7/CSA The following information is required to apply for a Certification according to ASME A17.7/ CSA B44.7: Elevator Sub-Systems, Components, or Functions 1. 2. 3. According to ASME A17.7/CSA B44.7 Mandatory Appendi x I-3 your application shall include the following: A written declaration that the same application has not been submitted to any other AECO, or a written Name and address of the manufacturer / the authoriz ed representative and the place of manufacture. Name and address of applicant Elevator Sub-Systems, Components, or Functions 3. 4. 4.1. a) description of the equipment b) a description of a particular elevator system, sub- system, component, or function to which this Code i s Code Compliance Document which includes the followi ng: Technical documentation: A written declaration that the same application has not been submitted to any other AECO, or a written explanation as to why the application is being subm itted to another AECO. b) a description of a particular elevator system, sub- system, component, or function to which this Code i s being applied c) a deviation list of ASME A17.1/CSA B44 Parts, Sec tions, or requirements that have been addressed by compliance with ASME A17.7/CSA B44.7 d) technical documentation to demonstrate conformity a nd enable verification of conformance e) a list of applicable GESRs e) a list of applicable GESRs f) the risk assessment report with name and expertis e of team members and the date of completion of the risk assessment processes g) procedures for acceptance inspections and tests to verify conformance with the CCD h) procedures for tests, periodic inspections, maint enance, replacements, adjustments, and repairs to b e incorporated into and made a part of the Maintenanc e Control Program (MCP) required by ASME A17.1/CSA B44, requirement 8.6.1.2.1 A17.1/CSA B44, requirement 8.6.1.2.1 4.2. 4.3. 4.4. 4.5. 4.6. The assembly instructions Results of any tests or calculations Technical drawings and/or diagrams A general description including its intended use (i ntention parameters) and conditions affecting use A list of GESRs taken into consideration and the me ans adopted to conform. 4.6. 4.7. 5. Steps taken at the manufacturing stage to ensure th at the series-produced sub-system, component, or functions conform to the examined ones. The assembly instructions A representative sample(s) of the sub-system, compo nent, or function, or details of the place where it can be examined
Posted on: Sun, 15 Sep 2013 14:58:09 +0000
Trending Topics
Recently Viewed Topics
© 2015