Download ImgBurn 2.5.0.0(kely258) GET Full Version Setup - TopicsExpress



          

Download ImgBurn 2.5.0.0(kely258) GET Full Version Setup efilecropdome.blogspot/2014/07/download-imgburn-2500kely258-get-full.html Free Download Full Version Download ImgBurn 2.5.0.0(kely258) Full Version Lifetime License Serial Product Key Activated Crack Installer DownloadImgBurn 2.5.0.0(kely258) Full Version Lifetime License Serial Product Key Activated Crack Installer Download ImgBurn 2.5.0.0(kely258)Full Version Download and Install Instructions : Download the ImgBurn 2.5.0.0(kely258) Installer Follow the install setup wizard. Be sure to install all the components for a successful installation. Click Run if prompted and the Online Launcher will automatically install ImgBurn 2.5.0.0(kely258)] . Enjoy a FULLY ACTIVATED ImgBurn 2.5.0.0(kely258) . copied from ImgBurn Homepage: ImgBurn is a lightweight CD / DVD / HD DVD / Blu-ray burning application that everyone should have in their toolkit! It has several Modes, each one for performing a different task: Read - Read a disc to an image file Build - Create an image file from files on your computer or network - or you can write the files directly to a disc Write - Write an image file to a disc Verify - Check a disc is 100% readable. Optionally, you can also have ImgBurn compare it against a given image file to ensure the actual data is correct Discovery - Put your drive / media to the test! Used in combination with DVDInfoPro, you can check the quality of the burns your drive is producing ImgBurn supports a wide range of image file formats - including BIN, CUE, DI, DVD, GI, IMG, ISO, MDS, NRG and PDI. It can burn Audio CDs from any file type supported via DirectShow / ACM - including AAC, APE, FLAC, M4A, MP3, MP4, MPC, OGG, PCM, WAV, WMA and WV. You can use it to build DVD Video discs (from a VIDEO_TS folder), HD DVD Video discs (from a HVDVD_TS folder) and Blu-ray Video discs (from a BDAV / BDMV folder) with ease. It supports Unicode folder/file names, so you shouldnt run in to any problems if youre using an international character set. ImgBurn supports all the Windows OSs - Windows 95, 98, Me, NT4, 2000, XP, 2003, Vista, 2008 and 7 (including all the 64-bit versions). If you use Wine, it should also run on Linux and other x86-based Unixes. Its a very flexible application with several advanced features that are often lacking in other tools, especially when it comes to burning DVD Video discs. It supports all the latest drives without the need for updates (including booktype / bitsetting / advanced settings on many of the major ones - i.e. BenQ, LiteOn, LG, NEC, Plextor, Samsung, Sony). There is an image queue system for when youre burning several images (which you can automatically share between multiple drives if you have more than one) and an easy-to-use layer break selection screen for double layer DVD Video jobs. The Automatic Write Speed feature allows you store your favourite burn speed settings on a per Media ID basis, right down to a drive by drive level. Data captured during the burn (write speed, buffer levels etc) can be displayed / analysed using DVDInfoPro. Whilst ImgBurn is designed to work perfectly straight out of the box, advanced users will appreciate just how configurable it is. Oh and lets not forget the best thing about it.... its 100% FREE ;-) First and foremost, ImgBurn is a freeware tool. You cannot bundle it with your own commercial application and you cannot sell it in any way, shape or form. As an individual, youre allowed to use it anywhere you like - be it at home or at work (assuming they dont mind of course!). ED2K Link: ed2k://|file|SetupImgBurn_2.5.0.0.exe|2169915|42E29803A1E54A133C4918C78340C396|h=AG7UN26TFZYFUBEK5AZTICMOCJUX4DY6|/ Changelog: Added: An Advanced input mode to build mode where you have total control over the layout of the disc and can add new folders, change names etc. (i.e. youre no longer limited to burning an existing folder structure on your hard disc as-is) Added: Optional logging when hidden or system files/folders are skipped in Build mode due to the current settings (i.e. when Include Hidden Files or Include System Files are disabled). Added: Yet another attempt at setting the write speed - this one does it 100% by the book. It fills the fields in the performance descriptor sent via SET STREAMING with the values returned in the descriptor after issuing the GET PERFORMANCE command. (The previous best method of setting the speed missed one field out) Added: An option (off by default) to enable the enumeration of medium changer devices (this was previously always enabled) on the I/O tab in the Settings. Added: Support for enumerating medium changer devices via the SPTI Device Interface method too - previously it was always done by Device Class. Added: The graph data preview in the Settings now uses a default value for media/volume id if one isnt available based on the current media/image file. Added: Support for another IOCTL for locking the drive - this one (only) appears to work with the Device Interface enumeration method of the SPTI I/O interface (lock volume doesnt). Added: Support for using Opti Drive Control as the IBG viewer when you click the Display Graph Data buttons/menu option. Added: ImgBurn now adds itself to the context menus Open With submenu for files its associated with. Added: Debug logging to the function that compares the image file/disc layouts. Added: Option to disable the Fix VTS Sectors function when building a DVD Video disc. Added: The Create DVD File feature can now make DVD files with the MediaType field set to CD. Added: Support for saving plain MODE1/2048 discs as a MODE1/2352 image in Read mode by saving as a BIN/IMG file. Added: Support for converting a MODE2/FORM1 track (on a single session/track disc) into MODE1 when reading a disc so it can be stored in an ISO file. Added: Support for burning CCD files. Added: Support for adding files that exceed the limit imposed by the ISO9660/Joliet file systems. Those file systems will record the file size as 4GB (-1 byte) but all their data will be physically present in the image. The UDF file system will use the correct size. Added: Support for building images using the MODE2/FORM1/2352 data type. (previously it only supported MODE1/2048) Added: Warning when user attempts to read a complex disc to an ISO file and option to use BIN instead. Added: Support for using BurnPlot as the IBG viewer when you click the Display Graph Data buttons/menu option. Added: Advice in the log window (on how to remove the virus) for when the maximum number of secrets exceeded error in encountered when searching for devices (and 0 drives are found). Added: Mini lookup table for some CD disc IDs to get manufacturer info. This info is now show in the disc information panel (under ATIP Information) and also in the log when you erase a disc or burn one. Added: Option to stop the program from analysing (doing the dummy decode pass on) cd-da ready wav files. Added: Show the booktype in the log when reading a disc in Read mode. Added: A check to ensure all the DVD Video files in a sequence are present. (i.e. itll prompt if VTS_XX_1.VOB and VTS_XX_3.VOB are present but VTS_XX_2.VOB isnt) Added: It now does a basic parse of any supported Special file system on a disc when in Read mode so it can display a volume label (to match what youd see when loading an image of said disc into Write mode). Added: Write Speed Miscompare! warning in the log when the drive reports a write speed that doesnt match what the user selected. Added: Error balloon when user tries to enter an unacceptable character in the Rename box when replacing/overwriting files. Added: Error checking (and logging) when searching for folders/files (via FindFirstFile/FindNextFile) and adding them to the image in Build mode. Added: Detection of attempts to build Vista style OS installation discs (via the sourcesinstall.wim file) and the relevant prompting for conflicting settings, failing to make it bootable etc (same as an I386 install disc). Added: Explore and Open options to the Source boxs context menu in Build mode. Added: You can now control which image layout files Build mode creates via its own set of options (rather than piggy backing the Read mode ones) Added: Ability to select the media type when creating an MDS file via the Create MDS File feature. Added: Ability to select the font used by the programs GUI. Added: New CLI parameter /CERTIFICATEFOLDER to tell the program if it should attempt to include/create a CERTIFICATE folder when a BDAV/BDMV folder is present. Added: Sanity checking for most of the comboboxes - to catch errors in translations where they dont notice Ive added new entries! Added: Average Write Speed to the log when full erasing a BD-RE disc with perfer properly formatted discs enabled - i.e. so it performs the Zeroing Sectors part. Added: Workaround for a bug in Windows 7 (7077 anyway) where the PlaySound API will bring up an insert disc error box if the current working directory is no longer valid (i.e. it was set to an optical drive and the disc has been ejected). Added: Workaround for drives/drivers that randomly report a bogus error (No Additional Sense Information) during the burn, thus forcing a retry - which fails with the error Invalid Address For Write because those sectors HAVE actually been written ok - according to the tracks NWA info anyway. Added: The option to read/write CD-TEXT using the Ansi code page rather than ISO 8859-1. Added/Changed: The log entry/error box that pops up when send cue sheet or set write parameters fail now includes a reason in the form of the decoded sense area message. Added/Changed: The ISO9660 Volume Label will now accept characters based on the current ISO9660 character set selection. Added/Changed: Had a go at making all the Build mode question type messageboxes simpler and translatable. Added/Changed: Tweaked and cleaned up the file search code when loading CUE files. It now supports relative paths. Changed: The installer no longer offers the Quick Launch option when Windows 7 is detected as an OS. Changed: The SPTI device enumeration method now defaults to Device Interface on XP SP2/2003 SP2 + IMAPI v2.0, XP SP3, Vista and newer. Changed: The SPTI device enumeration method CdRom Class is now known as Device Class. Changed: The CERTIFICATE folder is no longer created for Blu-ray Video discs by default. This means the programs creating the file structure have more control over whether one gets added or not. Changed: Tweaked all the code for file associations to make it more compliant with Microsofts documentation. (The installer cleans up the old ones so make sure you use it!) Changed: Tweaked the code used to determine the drives current write speed before then displaying the Write Speed Miscompare message (I blame the buggy drive firmware!). Changed: Tweaked the code that positions forms when they open (in the middle of the main form) so theyre no longer drawn a few pixels off the screen (assuming the main form is along the edge) when desktop composition is enabled under Vista / 7. Changed: Tweaked the code that positions forms when they open (in the middle of the main form) so theyre opened on whichever monitor their centre point is on (or the nearest to it). Changed: Tweaked some of the functions associated with the ISO9660 file systems volume label so they handle characters with extra bits like accents a little better and hopefully reduce the number of _ characters that end up being used. Changed: Even when set to No, the DVD/MDS layout files will still be created (if theyre selected in the first place) when multiple output files have been created (i.e. file splitting has been used). Changed: Tweaked the way fields in the Joliet volume descriptor are read to hopefully deal with buggy descriptors (like those written by XPs built in burning software) where the fields dont contain Unicode text. Changed: Updated the Virtual TreeView control to the latest on SVN. Changed: Ignore failure to set the layer break position (when changeable or not) if the desired position is where the drive reports it is already. Previously it only ignored the failure if the position was the same and wasnt changeable. Changed: Tweaked some of the code that sizes and positions controls based on the current translation. Changed: The information window shown when building the image/calculating its size in Build mode can now be translated. Changed: The custom strings inserted into system / application menus can now be translated. Changed: When loading a CUE into the Create CUE File feature, the program will now warn you if track/index info will be lost (i.e. if a file is used for more than 1 track or a track has more than 1 index). Changed: Renamed Create CD CUE File feature (and associated buttons/tooltips etc) to Create CUE File so it matches with Create DVD File & Create MDS File. Changed: Rewrote all the code that deals with when to create/not create CCD/CUE/DVD/MDS files. Each one is handled individually now. Changed: Modified that MDS file slightly when building an image with a BDAV/BDMV folder in it (so itll play when mounted in DT). Changed: Since adding support for CCD/CUE/DVD, the Create MDS File term/option in the Settings didnt really fit - so its been renamed to a more generic Create Image Layout File. Changed: The Filter Drive Load Order feature now scans for and lists device class filters found in all the relevant CdRom keys under HKLMSYSTEMCurrentControlSetEnum[IDE|SCSI|USBSTOR|1394] rather than just the first one it finds with an UpperFilters/LowerFilters entry. Changed: The Filter Drive Load Order feature can now remove Upper/Lower Device Class filters. Changed: When burning a CD, the program will now also issue the SET STREAMING command (where supported and in addition to the existing SET CD SPEED one) to set the write speed. Changed: FastWrite no longer applies to BD-R, the new option BD-R Verify Not Required now takes its place. Changed/Fixed: Tweaked the Title Case function to handle certain strings a bit better. Changed/Fixed: Implemented a workaround for Windows 7 whereby ImgBurn prompts Do you really want to cancel? if its open when you try to restart/shutdown the computer. Changed/Fixed: The program would only use the layer break position in an IBB if the /CLOSE switch was issued via CLI, /CLOSESUCCESS wouldnt work (and it should have done). Fixed: Clicking Cancel to certain build mode prompts (that correct conflicts/settings) didnt prevent some other prompts from popping up. Fixed: Initial disc space check when doing a Read operation didnt take into account the wave header when outputting an audio cd to a wav file. Fixed: The MD5 was incorrect when reading an audio disc to a *.wav file. Fixed: Incorrect / missing drive letters when using Device Interface SPTI enumeration. Fixed: The Device Interface SPTI drive enumeration method didnt work on Vista (drive letters would have been used as a fallback). Fixed: A little bug (they youd be very unlikely to run into) in the function that compares the layout of an image file to the layout of a disc in terms of sessions, tracks etc. Fixed: A problem where code (specific to Image File output mode) was being called for something that only applies to Device output mode. This was to do with changing the data type to MODE1/2048 if the current disc was DVD/HD DVD/Blu-ray. Fixed: Problem with reporting the correct error code in the booktype setting tool on the LiteOn tab if the drive doesnt support any of the 3 different I/O command versions (it would always just return No Additional Sense Information). Fixed: The wrong Free Space was/could be displayed in Build mode (image file output) if the destination was set to desktop[*.*] and the desktop folder was on a different drive to the Image File one configured in the settings. Fixed: A problem with some code that decides if a CCD file should be created or not. Fixed: A few problems with the creation of CCD files (wrong values in certain fields) - mainly when doing multisession. Fixed: Incorrect start time of Indexes >= 1 in a CUE file when any sort of pre/postgap was also present. Fixed: If the unlock volume (exclusive access) function failed after an erase, the program logged that the erase had failed - when actually it hadnt. Also, if the erase had failed but the unlock succeeded, the program logged that the erase was successful. Fixed: The volume label tooltip on the Read mode progress screen was showing Unknown for fields that it shouldnt have been. Fixed: Problem where the program opens the drive whilst in the middle of a temporary open/close which leads to the drive being left in a closed state (invalid handle message in the status bar) and potentially leaves an orphaned drive handle which prevents the program from being able to lock the drive for exclusive usage. Fixed: Labels were not displaying the & character properly in the Image Information box. Fixed: List out of bounds error when changing the language. Fixed: Bad text width calculation (due to font changes) when positioning controls. Fixed: Task status wasnt updated from Fixing VTS Sectors to Getting Region Information. Fixed: An issue where some internal stuff got messed up as a result of the program prompting to include ADV_OBJ / CERTIFICATE folders (but only if the user said Yes). Fixed: Multi-monitor issue where forms centred over the main one could be displayed slightly off the screen. Fixed: A call to the SystemParametersInfo(SPI_GETNONCLIENTMETRICS) API function was failing on pre-Vista OSs and so the GUI font might have been different to previous versions of the program - shouldnt have been an issue for people using the default OS fonts for everything though. Fixed: Bogus Destination text (parent folder of the *.IBB) when loading a project in Build mode where the Output is set to Image File and the destination field is blank. Fixed: Clicking the Close (X) button in the preparing image / building image tree boxes closed the window but didnt actually stop the program from doing what it was doing. image.bayimg/dankiaabc.jpg Free Full Version Program Software for Windows PC Crack Serial Keygen Patch Null Activator Key efilecropdome.blogspot/
Posted on: Fri, 04 Jul 2014 10:43:23 +0000

Trending Topics



Recently Viewed Topics




© 2015