EV X Line (ONE STOP SHOPPING @ RJM) 1 SET : (Line Array + Subwoofer + Power Amp (digital input) + DLMS (FIR drive technology) Jumlah unit bisa disesuaikan budget dan EVENT yang biasa dihandle. Original USA dan Garansi EV Indonesia. Tinggal beli Mixer (bisa analog atau digital) saja. LINE ARRAY : ELECTRO VOICE Xvls High-output, three-way line-array system Rectangular cabinet design 90º horizontal coverage pattern ideal for long-throw applications EV Hydra(R) time-synchronized vertical plane-wave generator provides excellent far-field summing Ring Mode Decoupling (RMD™) provides level-independent fidelity, greater midbass clarity, and high-frequency accuracy Proprietary rigging allows for rapid venue load-in and load-out. SPESIFICATION : Chassis Size 381mm (15) Color Black Coverage (Nominal -6 dB) H 90° Coverage (Nominal -6 dB) V 5° Single Box @ 1 Meter Depth 740.4mm (29.15) Enclosure Material Birch plywood, textured epoxy paint Environmental Specs IEC 529 IP24, MIL STD 810 Flying Yes Frequency Response (-10 dB) 30 - 17,000Hz Frequency Response (-3 dB) 50 - 16,000Hz Grill Powder-coated steel Height 494.3mm (19.46) HF Nominal Impedance 5.3Ω HF Power Handling 225 W continuous, 900 W peakWatts 1200-8000 Hz HF Transducer 3 x 3-in ND6-16 Input Connections 2 Neutrik® NL8 Internal Crossover No LF Nominal Impedance 4Ω LF Power Handling 1200 W continuous, 4800 W peakWatts 50-200 Hz LF Transducer 2 x 15-in EVX-155PL Max. SPL/1m (calc) 134 LF/142 MB/144 HF dBdB MF Nominal Impedance 8Ω MF Power Handling 600 W continuous, 2400 W peakWatts 300-2000 Hz MF Transducer 2 x 8-in ND08 Outdoor No Peak SPL @ 10m 135dB 4 Box Array @ 10 Meters Recommended High-Pass Frequency 50Hz Sensitivity 1 W/1 m 98/108/114 dBdB Speaker Type Three-Way System Power Handling (Continuous/Program/Peak) 1200Watts Weight Net 117kg (257.94 lbs) Width 1244.6mm (49) ELECTRO VOICE Xvlt High-output, three-way line-array system Five-degree trapezoidal cabinet design for lower J section of linear array 120º coverage typical for medium-throw assignment EV Hydra(R) time-synchronized vertical plane-wave generator provides excellent far-field summing Ring Mode Decoupling (RMD™) provides level-independent fidelity, greater midbass clarity, and high-frequency accuracy Proprietary rigging allows for rapid venue load-in and load-out Chassis Size 381mm (15) Color Black Coverage (Nominal -6 dB) H 120° Coverage (Nominal -6 dB) V 8° Single Box @ 1 Meter Depth 740.4mm (29.15) Enclosure Material Birch plywood, textured epoxy paint Environmental Specs IEC 529 IP24, MIL STD 810 Flying Yes Frequency Response (-10 dB) 30 - 17,000Hz Frequency Response (-3 dB) 50 - 16,000Hz Grill Powder-coated steel Height 494.3mm (19.46) HF Nominal Impedance 5.3Ω HF Power Handling 225 W continuous, 900 W peakWatts 1200-8000 Hz HF Transducer 3 x 3-in ND6-16 Input Connections 2 Neutrik® NL8 Internal Crossover No LF Nominal Impedance 4Ω LF Power Handling 1200 W continuous, 4800 W peakWatts 50-200 Hz LF Transducer 2 x 15-in EVX-155PL Max. SPL/1m (calc) 133 LF/141 MB/144 HFdB MF Nominal Impedance 8Ω MF Power Handling 600 W continuous, 2400 W peakWatts 300-2000 Hz MF Transducer 2 x 8-in ND08 Outdoor No Peak SPL @ 10m 135dB 4 Box Array @ 10 Meters Recommended High-Pass Frequency 50Hz Sensitivity 1 W/1 m 97/107/114dB Weight Net 115kg (253.53 lbs) Width 1244.6mm (49) ELECTRO VOICE XSub Overview High-output, dual EVX 180B woofers, 1200-watt, subwoofer system, rectangular cabinet with identical footprint as other X-Line systems. Linear array technology system, can be flown or ground stack with non-flying version. Ring Mode Decoupling (RMD) provides level independent fidelity. New proprietary rigging allows for rapid venue load-in and load-out, linking hardware included. One of four application specific X-Line models. Specifications:  ponse (-3dB): 40 - 400 Hz Frequency Response (-10dB): 35 - 500 Hz Sensitivity 1W/1m: 103 dB Max. SPL / 1m (calc): 140 dB Coverage (nominal -6dB) H: 200 Coverage (nominal -6dB) V: 325 System Power Handling (continuous/program/peak): 1200/2400/4800 Watts LF Transducer: EVX180B LF Nominal Impedance: 4 Ohms Color: Black Flying: Yes Input Connections: 2 Neutrik NL8 Outdoor: No Chassis Size: 18 inches Speaker Type: Line Arrays, Subs Weight Net: 92 kg ( 202.83 lbs ) Dimensions (HxWxD): 494.3 x 1245 x 740 mm (19.46 x 49.02 x 29.13) POWER AMP : ELECTRO VOICE TOUR GRADE 5 (TG 5) TG5 High-level touring performance Rugged, lightweight package 2000 W per channel (2 Ω) Grounded Bridge Class-H design Switch-mode power supply Microprocessor-controlled Front LCD panel for operation-mode setup and monitoring Slot for optional RCM-26 IRIS-Net-compatible DSP and control module 11-level protection package Only 31.4 lbs (14.2 kg) SPECIFICATION : A/D Conversion 24 Bit linear, Sigma-Delta, 128 times oversampling Amplifier Gain 39, 35, or 32dB Switchable Analog Inputs Yes CAN Bus Interface 10 - 500 kbaud, 2x RJ-45 (IRIS-Net Control) Continuous Rated Power (1 kHz, THD 1%) 2Ω 2000Watts Continuous Rated Power (1 kHz, THD 1%) 4Ω 1450Watts Continuous Rated Power (1 kHz, THD 1%) 8Ω 850Watts Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω 1200Watts Continuous Rated Power (20-20 kHz, THD<0,2%) 8Ω 600Watts Control Protocol CAN-Bus (with RCM 26 module) D/A Conversion 24 Bit, Sigma-Delta, 128 times over-sampling Data Format 24 Bit linear A/D and D/A conversion, 48 Bit processing Depth 512mm (20.16) Digital Inputs Optional with RCM-26 DIM 30 0.02% Electronics Type Amplifier FIR-Drive Optional with RCM-26 GPIO Control Ports 1 x 6-pole Euro block, 2 control inputs, 2 control outputs, (+5 V, 200 mA/ GND) Height 88.1mm (3.47) Impedance 2/4/8Ω Input Impedance (Balanced) 20kΩ Input Sensitivity 0 dBu / +6 dBu / +7 dBu Selectable Intermodulation Distortion (SMPTE) 0.05% Internal Processing 2 DSPs (150 MHz, 300 MIPS) Maximum Bridged Output 4Ω 3800Watts Maximum Bridged Output 8Ω 2900Watts Network Control (IRIS-Net) Optional with RCM-26 Power Consumption 1000 W Power Supply 100 - 240V, 50 - 60 Hz Sample Rate 48 kHz Sample Rate Conversion (SRC) 32 kHz - 192 kHz, internal Sample-Rate- Converter Signal-to-Noise Ratio (A- weighted) 109dB Slew Rate 30V/µs Topology Class-H grounded bridge Total Harmonic Distortion 0.05% Weight Net 14.2kg (31.31 lbs) Width 482.6mm (19) ELECTRO VOICE TOUR GRADE (TG 7) TG7 High-power performance for top-level tours Rugged, lightweight package 3500 W per channel (2 Ω) Grounded Bridge Class-H design Switch-mode power supply Microprocessor-controlled Front LCD panel for operation-mode setup and monitoring Slot for optional RCM-26 IRIS-Net-compatible DSP and control module 11-level protection package Only 32 lbs (14.5 kg) SPESIFICATION : A/D Conversion 24 Bit linear, Sigma-Delta, 128 times oversampling Amplifier Gain 41.5/35/32dB Switchable Analog Inputs Yes CAN Bus Interface 10 - 500 kbaud, 2x RJ-45 (IRIS-Net Control) Continuous Rated Power (1 kHz, THD 1%) 2Ω 3500Watts Continuous Rated Power (1 kHz, THD 1%) 4Ω 2500Watts Continuous Rated Power (1 kHz, THD 1%) 8Ω 1500Watts Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω 2100Watts Continuous Rated Power (20-20 kHz, THD<0,2%) 8Ω 1050Watts Control Protocol CAN Bus D/A Conversion 24 Bit, Sigma-Delta, 128 times over-sampling Data Format 24 Bit linear A/D and D/A conversion, 48 Bit processing Depth 512mm (20.16) Digital Inputs Optional with RCM-26 DIM 30 0.02% FIR-Drive Optional with RCM-26 GPIO Control Ports 1 x 6-pole Euro block, 2 control inputs, 2 control outputs, (+5 V, 200 mA/ GND) Height 88.1mm (3.47) Impedance 2/4/8Ω Input Impedance (Balanced) 20kΩ Input Sensitivity 0/+6/+9 Selectable Intermodulation Distortion (SMPTE) 0.05% Internal Processing 2 DSPs (150 MHz, 300 MIPS) Maximum Bridged Output 4Ω 7000Watts Maximum Bridged Output 8Ω 5000Watts Network Control (IRIS-Net) Optional with RCM-26 Power Consumption 1450 W Power Supply 100-240 V, 50-60 Hz Sample Rate 48 kHz Sample Rate Conversion (SRC) 32 kHz - 192 kHz, internal Sample-Rate- Converter Signal-to-Noise Ratio (A- weighted) 111dB Slew Rate 35V/µs Topology Class-H grounded bridge Total Harmonic Distortion 0.05% Weight Net 14.5kg (31.97 lbs) Width 482.6mm (19) DLMS : ELECTRO VOICE DX46 Electro-Voice Dx46 : 2 In x 6 Out FIR-Drive Speaker Processor Born of the legacy of such legendary DSPs as the Dx34, Dx38 and N8000, the Electro-Voice Dx46 combines ease of use and flexibility of control with the industry’s most advanced DSP technology: FIR-Drive. Electro-Voice Dx46 Features: 2-in x 6-out FIR-Drive Speaker Processor Analog and AES/EBU Inputs Full IRIS-Net Control and configutation Ethernet and USB data interfafes Full loudspeaker protection package including PA and Temp limiters Dedicated array EQ and delay sections for advanced applications -6dB switchable analog pad insert before A/D converters on inputs 4 Seperate delay sections 5 Contact closure inputs 60 Factory presets 30 User presets Unique Edit/Compare mode FIR-Drive The Electro-Voice Dx46 brings the same technology found in NetMax and RCM-26 equipped Tour Grade amplifiers to a new, compact and easy to use form factor. Providing six channels of 512-tap, complex phase FIR filters in addition to EV’s state of the art PA Limiter and TEMP Limiter algorithms. Connectivity Your Way The Electro-Voice Dx46 provides a USB interface for convenient local connection as well as an Ethernet interface with an integrated switch for more advanced and networked connectivity. Additionally, five GPI ports provide input for contact closures or other hardware interfaces. IRIS-Net IRIS-Net allows complete integration of your Electro-Voice sound system, including amplifiers, external controls, amplifiers and much more. Providing complete control, configuration, and supervision through standard or customized interfaces, IRIS-Net allows the ultimate in flexibility for controlling what you want to control-how you want to control it. Advanced DSP Options The Electro-Voice Dx46 provides complete input processing, with graphic EQ, PEQ and delay. You also get a complete FIR-Drive outputs stage including crossover, EQ and dynamics. But the Electro-Voice Dx46 goes further providing specialized Array EQ and Array Delay blocks on each output. Configuring and adjusting highly specialized array, cluster or zoned systems has never been more convenient. SPECIFICATION : A/D Conversion 24-Bit Delta Sigma Analog Inputs Two XLR, Two XLR THRU OUT Analog Outputs Six XLR Control Protocol USB, Ethernet D/A Conversion 24-Bit Delta Sigma Data Format 24-Bit Depth 355.6mm (14) Digital Inputs 1 XLR AES/EBU (2Ch) Dynamic Range 115dB A-weighted Frequency Response 20 Hz - 22 kHz ±0.5 dB Height 44.25mm (1.74) Input Impedance (Balanced) 10kΩ Internal Processing 48-Bit Double Precision Maximum Input Voltage 8.7 V / +21 dBu Without -6 dB Analog Pad Engaged Maximum Output Voltage 8.7 V / +21 dBu Nominal Input Voltage 1.55V/+ 6 dBu Nominal Output Voltage 1.55V/+ 6 dBu Output Impedance (Balanced) 50Ω Sample Rate 48 kHz THD+N
Posted on: Sat, 06 Dec 2014 03:46:57 +0000
Recently Viewed Topics
© 2015