Electromagnetic induction theory of electrical engineering is explained with the two divided concepts of the static magnetic field and the changing magnetic field. First, since electricity by electromagnetic induction generated by the rotation of an induction coil within the static magnetic field which was explained with ‘Fleming’s Right Hand Rule’ was found, human beings has upgraded the technology of ‘Rotating-Electromagnetic Induction Generation’ and for now 99% of the electricity used by human beings. Looking at the energy-electricity conversion efficiency of the above generation, for hydroelectric power generation which rotates turbines by water with density of 300 times higher than that of air the energy-electricity converting efficiency marks 80 to 90%, while steam power generation which shoots out steams to turbines by firepower or nuclear power marking 40 to 50% and wave-power generation which rotates turbines by air compressive force from up-and-down drift movement of waves marking less than 30% although the efficiency was not exactly indicated. In the case of wind power generation, it was done to improve the efficiency close to 50% by the technological advances such as the continued improvement of the gearbox recently. Second, when explaining another electromagnetic induction effect, Lenzs law or experimenting of changing the magnetic field in a rounded induction coil in a science class, ‘Vibrating-Electromagnetic Induction Generation(in the changing magnetic field)’ was considered to be just a tool to explain the principle of electromagnetic induction for an electrical engineering class and its electromotive force was never thought to be equivalent to that of electromagnetic induction using torque based on excellent high speed rotation technology. And it has become a field of abandoned development by the scientists. But I think if we could utilize the rapid advance of scientific technologies such as the emergence of extra fine coils which could not be imagined before, neodymium magnets which are small but showcase strong magnetic fields and new rectification methods enabling effective rectification with a small size just like semiconductor chips, we can overcome the weakness of vibration generation with a reduced relative velocity. So I have been intensively studied the up-grade way of this Vibrating-Electromagnetic Induction Generation(in the changing magnetic field) for a few years, finally I can registrate my patent ‘Vibrating-Electromagnetic Induction Generator’ a few days ago as the results of numerous trials and errors. We don’t have a proven track record of the energy-electricity conversion efficiency of the vibrating-electromagnetic induction generation, because a scientist bars have abandoned the development of the field. But for example, where the total movement energy of waves is 1,000N, most of them are lost during the process to obtain air compressive force except about 100N of compressive force but such remaining force is also lost considerably during the electricity generation by torque, thus resulting in 30N of electricity from 1,000N of energy sources. That’s the reality in our wave-force generation today. As a result, the performance by wave-force generation indicates less than 0.05%. However, assuming in the above example that vibration generation devices are separated in small and medium-sized boats with costs equivalent to those of single rotation generator, the total sum of electricity generated by vibration generation which uses the vibration power by adapting up-and-down drift movement of waves will be more than 300N even in a conservative estimate. Of course, each boat must be equipped with a massive ESS (energy storage system) or batteries and the boat must frequently go in and out of the power transmission facilities on land to handle the electricity but they will not be a big problem as the generation can be done on a boat while people care for their ordinary lives and the facilities investments and maintenance costs required to prepare for natural disasters will be much less than those of the wave-force generation today. In conclusion, though the rotating power can be obtained when we change or confine the direction of the nature’s force and concentrate in a certain rotary direction, but the vibrating power can be obtained more easily than the rotating power when conforming to the nature, this small difference can lead to a huge difference in the energy-electricity conversion efficiency such as the above example. Moreover we can get the electricity on rivers and streams near cities, and eliminate the waste of electrical energy according to transmission. It is difficult to obtain a rotation force in the flow of the river, the vibration force can be obtained easily by a simple operation. And then we can find a clue to resolve Global Warming as this revolutionary efficiency improvement of ‘Vibration-Wave-Generation’ that is not-pollution, no danger of depletion, natural resources corresponding to 5 times the world’s population is used, which exists on Earth. And the other way to guess the energy-electricity conversion efficiency of ‘Vibrating-Electromagnetic Induction Generation’ is the fact that my device is a sample vibration generator containing unnecessary and crude components due to the limits as an individual inventor without fine testing and measurement equipment but users can start the small motor with a fan by shaking their wrist lightly as shown in the video indicating that a bigger motor(=rotary generator) using high speed rotation by an electrical drill is required to generate the same force under existing electromagnetically induced generation using torque. Maybe the force required to start the motor using the electrical drill would be multiple times bigger than the force required to start the sample vibration generator of 370g (the weight can be significantly reduced when mass produced) by shaking the wrist only. So the efficiency of electrical converting is better by the vibration generation than the torque generation. Though the sample vibration generator’s electric power is maximum 0.75W when a person runs with the generator, It’s only a result that I choose the hand-makable manufacturing materials, and I depicted in my patent statement that if it equipped with a full-scale mass production system using an automated devices, I can get the electricity at least 5~10 times more. If the electricity of Vibrating-Electromagnetic Induction Generation is much bigger than the electricity of Rotating-Electromagnetic Induction Generation, it will come to driving a big change in the electromagnetic induction generation market which is formed as a monolithic. Because it means one step closer to promising technology which can convert the moving energy into the electricity immediately, and we can supply the electricity as required, where necessary. And because it’s convenience is really innovative. Thus, I would like to develop power sources to various devices using this feature. As belonging to this category, the charger of a cellular phone, tablet PC, notebook and camcorder which can combine with it or form in the wearable or attachable furthermore embeddable types in the side of them, MEMSs independent power systems, auxiliary power units for electric vehicles, such as ships, scooters and bicycles to extend operating distance. Since both electromagnetic generators produce a relatively powerful electricity in comparison to the other generating means such as a piezoelectric power generator, we can promote in the form of a direct connection to the battery is being used, it will give more convenience to us. The stereotype that the electricity is the rotary generation is the biggest obstacle. When we can accept new ideas or theories without prejudices or stereotypes, the groundbreaking idea can fly freely like a butterfly. Thanks for being given a long sentence to read. If you interest in my projects, please remain your mail in my E-mail address which is displayed in link video. youtube/watch? v=wcREozjDp4k
Posted on: Tue, 25 Nov 2014 09:12:06 +0000
Trending Topics
Recently Viewed Topics
© 2015