How to Remove Cast Iron Protective Coating For one reason or another; signs of rust, built-up grime and gunk, you found your pan buried in a barn, or a thrift store; some of us want to start over with a fresh protective coating. To do this youll need to strip it down to the bare iron surface. If using soap is mentioned, this will be one of the only times using soap is OK since you will be re-seasoning the pan. Option 1: Strip Seasoning with Hot, Soapy Water This method of cleaning a cast iron pan is for one that needs a regular stripping. At some point if food starts to stick to the surface or you notice your pan becoming a dull gray it may be time for some scrubbing. Wash the item in hot, soapy water and use a stiff brush to remove old seasoning. Rinse and dry completely then re-season. Option 2: Using Oven Cleaner, Vinegar and Water To remove hard, old stuck on gunk and rust, following the instructions below: In a well-ventilated space (outside is best) and wearing a pair of gloves to protect your hands; coat your pan on all sides that needs cleaning, with a heavy spray of oven cleaner (Easy-Off is one spray you can use). I would also place an old towel or something under the pan before spraying. When you’re done spraying, you can place the item in a garbage bag to keep debris away keep the oven cleaner from dissipating as fast. Let the oven cleaner sit on the pan for 40 minutes, depending on how much build-up is on the pan, you may need to let it sit longer and you may also need to re-apply the oven cleaner once or twice more. When the build-up has been removed, wash the pan in hot, soapy water. If you have rust on the pan, soak in a bath of 50/50 white vinegar and water. Use enough for the item to be fully submersed in the solution. Let sit for 30 minutes then dry completely. Lightly scrub with super fine 0000 steel wool to remove the surface rust. Wipe with old towel or paper towel to remove any residue. Season your pan as described above. When using vinegar and water, keep this in mind: Only soak the item in the vinegar mix for the least amount of time possible. Do not leave it overnight since the solution could eat heavily away at the metal.
Posted on: Thu, 17 Jul 2014 10:07:44 +0000
Trending Topics
Recently Viewed Topics
© 2015