STUDY MATERIAL OF COMPUTER BABU DISK OPERATING SYSTEM (DOS) INTRODUCTION DOS is an Operating System. It works as an interpreter between user and computer. We give English like commands and it converts it into machine language and after the computer has processed the information, returns the results to you in English. Ms. Dos consist of four essential programs and a set of additional utilities. Components of MS-DOS MS-DOS consists of four essentials programs and a set of additional utilities. Four main programs are Boot Record IO.SYS MSDOS.SYST COMMAND.COM Booting: Process that starts up a computer is called booting. It checks for proper functioning of all the peripheral devices attached with the system. It searches for the operating system and, when located, loads it into the main memory. See fig.01. Cold Booting is done by turning on the computer. Warm Booting is performed by pressing Ctrl+Alt+Del keys simultaneously. There are two name in DOS and is divided into 2 parts. 1. Primary Name 2. Secondary or extension. Primary name is separated from the Secondary name extension with the help of a dot (.) look at the following example. Example: ENVOICE. TXT Primary name can be from 1 to 8 characters long and Secondary name contains 3 or less than 3 characters and is optional. The extension tells DOS about what kind of file it is. A valid Character for naming a file are: from A to Z and the digit 0 to 9 C :\> Is known as DOS/command prompt, where we give the commands. DOS command divided into 2 parts. 1. Internal Commands or Memory-Resident Commands 2. External Command or Disk-Residence Commands Copyright © Computer Babu. Powered by Pandit Umesh Techsoft Solutions. All rights reservedSTUDY MATERIAL OF COMPUTER BABU . Copyright © Computer Babu. Powered by Pandit Umesh Techsoft Solutions. All rights reservedSTUDY MATERIAL OF COMPUTER BABU INTERNAL COMMAND There are also called memory-resident commands. These commands are automatically loaded into the computer’s memory during the booting process. They actually included in the Command file. So these commands are executable immediately after getting the dos prompt. A few internal commands are 01. VER 02. VOL 03 DATE 04. TIME 05. CLS 06. DIR 07. MD 08. CD 09. PATH 10. RD 11. COPY CON 12. TYPE 13. COPY 14. DEL 15. REN 16.PROMT Copyright © Computer Babu. Powered by Pandit Umesh Techsoft Solutions. All rights reservedA command can be given in Capitals or Small letters also. The internal commands can execute immediately but External Commands require special files for their execution without which it is not possible to execute them. 1. VER: - All O/S has its own edition number or release or version number. The version number indicates which edition of O/S you are working on. Syntax: VER Example: C:\> Ver Result will be: - Microsoft Windows XP [ Version 5.1.2600] 02. VOL: - It is used to display volume label and serial number of the current drive Syntax: Vol [drive:] Example: C:\> VOL 3. DATE: - Used to display the current system date and prompt for entering new date. Syntax: Date Example: C:\> date 4. TIME: - Displays the current system Time and prompt for entering new time. Syntax: Time Example: C:\> Time 5. CLS: - Clears the cluster screen. Syntax: CLS Example: C:\> CLS 6. DIR: - This command displays the list of directories and files with details like date of creation whether it is directory or file etc. Syntax: DIR Switches: /p : To view one screen of files at a time. /w : Displays only five column of filenames and directories. /b : Display only file and directory./l : Display all the information in lower case letters. /a — stands for attributes that are given below. /-h - Hidden ( or not hidden) files s/-s - System ( or not systems) files d/-d - Directory ( or not Directory) names r/-r - Read only( or not read only) files Example: DIR *.txt : Display all the files with extension .txt DIR D???.* : Display all the files starting with D and having less than or equal to four characters in the file name and any extension. Here “?” And “*” are called “wild card character”. “*” Stand for any number of the character “?” Stands for nay one character. 07. MD OR MKDIR: -Used to create a new Directory or nested Directories. Syntax: MKDIR OR MD [DRIVE:] PATH DIRECTORY NAME Example: C:\> MD SAMS 08. CD OR CHDIR: - This command allows you to change present directory to another directory. Syntax: CD [DRIVE:] PATH Example: C:\> CD SAMS and press 09. PATH: - This command defines a list of directories DOS Searches for external commands.Syntax: PATH (Display the current Search Path) PATH; : - ( Clear the search path so DOS will search for external commands only in the current directory) 10. RD: - To delete the empty directory. Syntax: RD [DRIVE:] PATH NOTE: -The directory must be empty when we use RD. Example: C:\> RD SAMS and press Switches: - 1. /s – Remove with subdirectories and files. 2. /q – Don’t ask to confirm. 11. COPY CON: -We use this command to create a new file. Syntax: COPY CON Example: C:\> Copy Con sams.txt Note: - Typing here and when you are done, press Ctr+Z or F6 key followed by Enter to save the current document. 12. TYPE: - This command allows you to see the contents of an existing file on the screen. SYNTAX: TYPE Example: C:\> TYPE SAMS 13. COPY: - Using this command you can make duplicate files of an exiting file from one location to another or one directory to another with different name or exiting name. SYNTAX: COPY < SOURCE FILE NAME> Example: C:\> COPY SAMS.TXT A:\TAJ Example: C:\> COPY*.TXT +*.BAK TARGET FILENAME And Then Press Enter Example: C:\> COPY SAMS.TXT C:\SAMS_1\FO\RECEPTION And Then Press Enter You can also have the option to change the name of files as you copy it. Example: C:\> COPYold.TXT C:\dos\new.txt And Then Press Enter 14. DEL/ERASE: This command removes one or more files from the disk or current working directories. SYNTAX: DEL filespec [/p] or ERASE filespec [/p] Example: C:\> DEL C:*.BAK /P And Then Press Enter Example: C:\> DEL abc And Then Press Enter Example: C:\> DEL ????.COM And Then Press Enter Switches: - 1. /p –confirmation 2. /q – In quit mode 15. REN: Used to change the name of the file or directory. SYNTAX: REN Example: REN sams sams1 Example: REN *.dat *.mst And Then Press Enter 16 PROMPT: This command allows you to customize the dos prompt. SYNTAX: 1. PROMPT ⇒ SOME SPECIAL $ PARAMETERS ARE GIVEN BELOW. CHARACTER EXAMPLE DESCRIPTION $Q = Equal Sign $$ $ Dollar Sign $t 12:30:06:92 Display current time $d tue 09-07-2007 Display current date $v msdos version 6.2 show dos version number $g > Greater than sign$L < Less than sign Most people like to set their prompt to $p$g which display the current directory followed by > sign. Example: PROMPT $P$G 17. TREE: - It is used to display directory structure of a specified directory graphically. Syntax : TREE [drive:] [path] [/f] [/F] : displays the names of the files in each directory. EXTERNAL COMMAND: These are also called Disk-Resident Commands. These commands are meant for special purpose. These are found in separate files on Hard Disk or Floppy Disk, So that they don’t typically consume valuable memory space. They are loaded into memory only when called. Some External Command are: 1. Xcopy 2. Move 3. FC 4. Doskey 5. Mem 6. FILTER a.. More b.. Sort c Find 7 Attrib 8. Deltree 9 Edit 10 Tree1. XCOPY: This command is faster than Copy Command and allows you to copy entire directories/disk including all the sub directories and files to destination. Syntax: XCOPY Source [ Target][/Y][-Y] [/P][/E] SWITCHES : /-Y : Prompts before copying over existing files. /y : Overwrites existing files without prompting. /p : Ask before copying each file. /e : Copying empty directory also. /s : Copying subfolders. EXAMPLE: XCOPY C:\SAMS D:\SAMS /S/E 2. MOVE : This command moves a file or group of files from one directory to another and also one disk to another disk. It can also be used to rename directories. SYNTAX: Move [Path File Name] [Destination file name path] SWICHES: /-Y : Prompt before it overwrites while it copies file that already exists. /Y : Overwrites existing files without prompting. EXAMPLE: move c:\sams\fo.txt to d: EXAMPLE: move c:\sams\fo.txt to d:\ new_sams 4. FC: Stands for File Compare. If you wish to compare two files or two sets of files then you may use this command. This command has the capability to differentiate between the files and display the difference SYNTAX: FC [/a][/b][/c][l][/n] Switches /a : This switch displays only the first and last line of each group. /b : Compare the files in library mode ( byte-by-byte) /c : Ignore the case of letters./l : Compare the files in text mode. /n : Displays the line number for lines that are different. EXAMPLE: FC first.txt second.txt\n and then Press 5. DOSKEY: Dos can remember only the last command you had entered. But in order to make DOS remember all the commands you enter you will have to load a DOSKEY utility. Also Used To Create Macros Syntax: DOSKEY and Press Display message on the screen. DOSKEY Installed. NOTE: - To display all commands from the history list one the screen. Example: DOSKEY / History or /h < Enter>. Now when DOSKEY is in memory, it can help store all the commands which you enter so that any of those commands need not be typed again to be executed. And this all are called HISTORY LIST. Now when you want the same command to be done you can use right arrow key or ‘F1’ or ‘F3’ Issuing following command. Second feature of DOSKEY is Doskey Macro. Using this macro you can create own command and latter you can run it on the system prompt. For example EXAMPLE: - DOSKEY C= CLS Now if you type at the system prompt only C and press enter it will clear the screen. Recalling Commands: Some key is provided to recall recent commands you have run since installing DOSKEY. Key Strok Effect Up Arrow Display the Preceding Command and further list. Down Arrow Show the next command you executed after the one that’s being displayed. Page Up Display the oldest command that is still in Doskey. Page Down Show the most recent command that you executed F7 Display the entire list of command that you executedd. F9 Selects a commands Alt+F7 Erase the command history list.Alt+F10 Erase all macros in memory Esc Clear the command line. Ctrl-T Command separator 6. MEM: This command displays amount of total available memory ( low, Expanded and Extended) and all currently programs. Syntax: MEM [/f][/p][/m] Switches: /f : Using this switch MEM display all the areas of memory that are fee. /p : Use this option to display the information one screen at a time. /m : Display information about how a specified program is using memory. Example: MEM/p and then press 7. FILTER: A Powerful feature of DOS is its use of filters to process data directly. A DOS FILTER can process in unique way any data that passes through it and can change what we see on the screen. There are three FILTERS include in DOS. A. MORE: More command used to pause vertical Scrolling on the display screen, after each screenful, The display pauses and the message - - More - - appears. Pressing any key display the next screen. EXAMPLE: C:\> MORE < TYPE FILE.TXT and then press EXAMPLE: C:\> DIR /MORE and then press B. SORT: Reads, Sorts in Order and sends the data to the screen, file or to another device. Sort to arrange data in an order. SYNTAX: SORT [drive:][Path][filename][/r][+n] Switches: [drive:][Path][filename] : Specifies the name and location of the file to be searches. It must be preceded by the redirection character ( SORT < NAME .TXT and then press EXAMPLE: C:\> SORT /+20 < PHONE .TXT and then press EXAMPLE: C:\> DIR / SORT > PHONE .TXT and then press Note: Sort command doesn’t distinguish between upper and lower case. It can sort file of maximum 63 k size. Combining Input & Output redirection : EXAMPLE: C:\> SORT < NAME .DAT > SORTNAME.DAT and then press Here the sort command is being directed to take its input from sortname.dat file. C. FIND: The find Filter is used to search a file one or more designated character (called a text string) Depending upon the form of the FIND Command. Each line having (or not having) the text string is sent to an output devices. Such as the Screen, a file or the printer. The text string is always typed within quotes ( “Text Sring”). SYNTAX: FIND [/v][/c][/n] “String “ [d:] [path][filename] Switches: [/v] : Displays all the lines that do not contain string. [/c] : Display the total number of lines found to contain the string. [/n] : Display the line number as well as the line that contains the string. [/i] : Ignores uppercase or lowercase during the search. Where: “String” : Specifies one or more alphabet or numeric character whose maximum length should not be more than 250 characters and must be enclosed in double quotes. [d:] [path][filename] : Specifies the name and location of the file to be searches .EXAMPLE: C:\> FIND “Rajni” my.txt per.txt and then press EXAMPLE: C:\> DIR/ FIND “TXT” and then press 7. ATTRIB: Every File on the Disk has its own description like size, space occupied, the type, the date it was created, etc. Likewise, every file has few attributes. The attributes of a file indicates whether it is a i) Read-Only File: r ii) Archive File a iii) Hidden File: h iv) System File s With the ATTRIB command you can check the attributes of a file. SYNTAX: ATTRIB [+r][+a][+h][/+s] [filename] Switches: +r, -r : +r Read-Only attribute or, -r turn of Read-Only attribute +a,-a : +a archive attribute, or -a turn of archive attribute +h,-h : +h hidden attribute, or –h turn of hidden attribute +s, -s : +s system attribute and it should not be used generally. Note: While Creating a new file every file gets read only attribute and archive attribute by default. EXAMPLE: C:\> ATTRIB my.txt +R and then press EXAMPLE: C:\> ATTRIB my.txt +H and then press 8. DELTREE: This command used for deleting an entire directory whether in that directory contains files or subdirectories and also it will delete hidden files.Syntax: DELTREE [drive:][path] directories [/y]
Posted on: Sat, 16 Nov 2013 12:45:38 +0000
Trending Topics
Recently Viewed Topics
© 2015