Thinking about unloading the A-arm buggy and a Built 2.3 with adapter. Have another buggy I would like to have done this year, Instead I am not looking to give it away. Buggy= Started out as a Berrien Encore 112 44.5 High 51.75 wide, A-arm converted front end spindles, Afco coil over shocks with adjustable compression and rebound 16 travel, Rack a pinion steering, comes with steering, floor, rear torsion, Set up for rear Coil overs, Does not have rear trailing arms or torsion eliminators. Buggy is all torn apart I have started to powder coat some of the parts Green and Purple. $1300 obo Motor= Built 2.3 stock crank and rods, Forged 12.5 pistons, D -port head, Milled 60, Port work, Crane Cam RPM 3400-7200 dur 300 inh/exh lift .510 int/exh Lode angle 108 degs, Crane rockers and springs, 7 Esslinger water pump pulley with 4 power pulley underdrive set up. Holley 350 2 barrel Header with super trap From what I have looked into this should be over 220 HP at the crank. I am not 100% just going by everything I have looked up. The guy I got the buggy from said it had some ASS to her. Comes with Adapter to VW trans $800 OBO There are some more parts that are powder coated all ready if you want to see the purple I used let me know. If you have any question you can txt me at 567-267-0482 or message me on here. I can take more pics if you need them. I know I put OBO dont try to lowball It does not have to go, If you want it all I will work with you UPDATE= Just so there is no confusion THE BUGGY IS TORN APART AND NOT AS IN THE PICTURE, THERE IS NO REAR TRAILING ARMS OR TORSION ELIMINATERS Located Crestline Ohio
Posted on: Fri, 16 Jan 2015 22:17:28 +0000
Trending Topics
Recently Viewed Topics
© 2015