Unravelling the mystery behind the megalithic stone walls of Saksaywaman Lying on the northern outskirts of the city of Cusco in Peru, lies the walled complex of Saksaywaman (Sacsayhuaman). The site is famed for its remarkable large dry stone walls with boulders carefully cut to fit together tightly without mortar. The stones used in the construction of the terraces at Saksaywaman, which weigh up to 200 tonnes, are among the largest used in any building in prehispanic America, and display a precision of fitting that is unmatched in the Americas. The stones are so closely spaced that a single piece of paper will not fit between many of the stones. This precision, combined with the rounded corners of the blocks, the variety of their interlocking shapes, and the way the walls lean inward have puzzled scientists for decades. The magnificent interlocking stones at Saksaywaman The magnificent interlocking stones at Saksaywaman. Photo source: Hakan Svensson The method used to match precisely the shape of a stone with the adjacent stones has been the focus of much speculation and debate. Various theories put forward include: stone softening using a mysterious liquid derived from a plant, mineral disaggregation from the heat generated from large sun mirrors, and even extra-terrestrial intervention. However, John McCauley, retired Architect and Construction Manager, who has been engaged in research on ancient construction techniques for over 40 years, has a different hypothesis, and it lies simply in the ingenuity and wisdom of ancient people. “We have to remind ourselves that the steady rise in mankind’s mastery of technology has taken place over thousands of years of trial and error; mastery of a successful technique in moving heavy stones, or in carving them, has only occurred because of the knowledge passed on through the failure and success of countless ancient engineers who were willing to experiment with a new thought, and have at their disposal a seemingly endless field of labor to execute their ideas,” wrote Mr McCauley, in a paper submitted to Ancient-Origins. Mr McCauley has carried out an extensive investigation of the Saksaywaman site in Peru, reviewing many possible methods for transporting the 25-200 tonne stones and has concluded that the lighter stones were dragged over carefully prepared natural soil beds, while the heavier stones were transported on timber sleds. Model testing on various roadbed constructions resulted in the estimation that the heaviest stones could have been moved by no more than 1,000 men. Once at the site, Mr McCauley says the stones were shaped using very heavy “pounders” and countless hours of labour to create the magnificent megalithic walls that can still be seen to this day. Each blow of a diorite boulder, he explained, would remove a small amount of stone until the final shape was attained, “This would take days and weeks, if not months of toil depending on how much material had to be removed.” He explained that another technique, called “trial and error”, was used with much lighter stones. With this method, the stones were shaped with pounders and, as the work progressed, “one stone was mated with another stone until the two finally fitted well”. The following sequence of photos, using scale models, and descriptions have been provided by Mr McCauley to illustrate how the ancient Inca may have been able to very accurately transfer the shape of stones in the megalithic walls. Model Photo 1 Saksaywaman Stones - Model Photo 1 “In this sequence, the assumption is made that an opening has been made in the wall and it needs to be filled with another stone. A wooden board is secured in the opening and spanned to two sides of the opening. A scribe is moved along the edge of the existing stone edge always holding it at the exact same angle to the angle of the wood so as to copy the shape of the stone very precisely The individual wooden template is then removed from the void space in the wall and is shaped with bronze tools and flint scrapers, resulting in a shape that is true to the edge of the void. The same sequence is performed for each edge of the void space. Each template board is tested against the shape that it copied to verify accuracy.” Model Photo 2 Saksaywaman Stones - Model Photo 2 “The master template for the entire void shape is then assembled with wooden dowels and inserted into the existing void space in the wall to verify that it fits exactly. The pinned and doweled joints are verified to be tight.” Model Photo 3 Saksaywaman Stones - Model Photo 3 “Now the hard part! The completed wood template is placed over a stone in the marshalling yard which most closely represents the shape needed in the void in the wall. These stones are laying in the stone marshalling yard in front of the wall which is being built. The master template is secured in place with stakes and ropes. The stone masons then transfer the shape of the template to the face of the stone. This transfer of the shape has to be done very accurately and is accomplished by using a narrow scribe board held firmly against the side of the template. This narrow scribe is used to mark the stone so that it can be cut precisely the same shape as the template. The stone masons then remove the template and begin to shape the stone based on the lines that were transferred from the wood template. After the rough carving has been completed, the template is used again to measure the accuracy of the shaping.” Model Photo 4 Saksaywaman Stones - Model Photo 4 “The “loose” stone from the marshalling yard has now been shaped and its profile double checked against the void space in the wall. Some flattening of the finished face has been accomplished, resulting in the general appearance of “channeling” which is evidenced on many of the stones in the wall.” Interestingly, most theories that have been put forward regarding the construction of ancient megalithic walls and sites have come from researchers who do not have experience with architecture or construction techniques. But some architects and engineers have argued that such expertise are essential for understanding how these structures were built. Earlier this year, structural engineer, Peter James, put forward an alternative theory for how the pyramids of Egypt were built. In responding to some of his critics, James posed the question: “If you wanted a house built would you use me or an archaeologist?” Mr McCauley’s research and findings come from the view that our ancient ancestors held a wealth of knowledge that they accumulated over many centuries. “One thing is for sure,” he said, “and that is that early man had a more communicative understanding of Nature, the progression of the heavens, and an intuitive knowledge of how things worked than for which we give them credit”. Featured image: The megalithic walls of Saksaywamen. Photo source: Wikimedia By April Holloway - See more at: ancient-origins.net/ancient-places-americas/unravelling-mystery-behind-megalithic-stone-walls-saksaywaman-001470#sthash.RUTqvhla.dpuf
Posted on: Sat, 15 Nov 2014 20:43:06 +0000
Trending Topics
Recently Viewed Topics
© 2015