VLAN Trunking Protocol: VLAN Trunking Protocol (VTP) is a Cisco proprietary protocol that propagates the definition of Virtual Local Area Networks (VLAN) on the whole local area network.[1] To do this, VTP carries VLAN information to all the switches in a VTP domain. VTP advertisements can be sent over ISL, 802.1Q, IEEE 802.10 and LANE trunks. VTP is available on most of the Cisco Catalyst Family products. Using VTP, each Catalyst Family Switch advertises the following on its trunk ports: 1. Management domain 2. Configuration revision number 3. Known VLANs and their specific parameter One concept in VTP is that larger scale networks may need to be limited in terms of which switches will act as the VLAN servers. VTP offers various options for recovery after a crash or for efficiently serving up redundant network traffic. In the image above, each switch has two VLANs. On the first switch, VLAN A and VLAN B are sent through a single port (trunked) to the router and through another port to the second switch. VLAN C and VLAN D are trunked from the second switch to the first switch, and through the first switch to the router. This trunk can carry traffic from all four VLANs. The trunk link from the first switch to the router can also carry all four VLANs. In fact, this one connection to the router allows the router to appear on all four VLANs, as if it had four different physical ports connected to the switch. The VLANs can communicate with each other via the trunking connection between the two switches using the router. For example, data from a computer on VLAN A that needs to get to a computer on VLAN B (or VLAN C or VLAN D) must travel from the switch to the router and back again to the switch. Because of the transparent bridging algorithm and trunking, both PCs and the router think that they are on the same physical segment! for more.... blog.eincop/2014/12/vlan-trunking-protocol.html
Posted on: Fri, 26 Dec 2014 13:25:44 +0000
Trending Topics
Recently Viewed Topics
© 2015