(Main in menu) For proper operation, you should check the installation of the satellite receiver as below and set up all system in accordance with following procedure. 1. Connect a/v output to TV set or other equipment and connect antenna cable to (Lnb) input 2. Connect the power cord to power supply socket 3. Press (menu) button, then the main menu will be appeared on your TV screen. 4. You can select each menu on that main menu with vol+/vol-and ok keys. I. prog list II. Prog edit III. Satellite IV. TP V. system VI. Game 1-1 (add satellite/edit satellite) In this menu, user can set up the satellite data and antenna. After Moving highlight on this installation menu icon and press ok button then below sub-menus will be appeared. And on each sud-menu, you can adjust each parameter. After Moving highlight on satellite and press ok button and you can find out below parameter. In this satellite set up menu you can set all data of satellite like name. LNB type, LNB frequency and diseqc1.2, You can move highlight up and down with CH+/CH-keys and you can choose proper item with VOL+/VOL- keys. 1Satellite name: you can select your required sat among satellite list. Then accordingly to several information will de change. 2 longitudes: you can select your required Satellite degree. 3 (Lnb) frequencies: you can select Lnb frequencies between Universal and single. If you select single Lnb, you can see only single Lnb frequencies. But if you select Universal Lnb you can see Universal. 4 22 kHz tone: if you want to use this switch, you should select on or if not, you select should off 5disEqC: you can select your available Diseqc switch with Vol+/vol-keys, also if you don’t want to use Diseqc you should select off 1 Satellite list After Moving highlight on Satellite list menu icon and press ok, you can find out all Satellite memorized. 1 auto search After Moving highlight on auto search menu icon and press ok button and you can find out below parameter, you can adjust channel search information, if you press ok button on the way of this, this will start to search, so please carefull. 1 Satellite Name: you can select your required sat with vol+/vol-keys 2 scan mode: you can select all channels, FTA, FTA +ca 3 scan type: you can select proper channel scan speed among options. Quickly search, detail search 4 polar: you can select proper polarity between Hor .and ver. 5 Symbol rate: this is also changed in accordance with TP. But You can directly insert with (numeric) keys 6 Lnb type: you can select Lnb frequencies between Universal and single 7 22 KHz tone: if you want to us this switch, you should select or if not, you should select off 8 Diseqc: you can select your available Diseqc switch with vol+/vol-keys, also if you don’t want to sue Diseqc you should select off. If you press ok button after all setting, this will start search channels and another channel name will be appeared on the screen. This will show you the procedure of channels search, after finish channel searching, you can select if you will store all searched information or not. If want to store all searched data, you should select ok keys. 4 network search After moving highlight on network search (menu) icon and press ok button and you can find out below parameter, you can adjust channel search information. If you press ok button on the way of this, this Will start to search, so please careful. 1 satellite name: you can select your required sat with vol+vol-kyes 2 scan mode: you can select all channels, fat, fat +ca 3 scan type: you can select proper channel scan speed among options. Quickly search, detailed search 4 polar: you can select proper polarity between Hor .and ver. 5 symbol rate: this is also changed in accordance with tp.but you can directly insert with (numeric) keys 6 (Lnb) type: you can select (Lnb) frequencies between Universal and single. 7 22 kHz tone: if you want to us this switch, you should select on or if not, you should select off 8 Diseqc: you can select your available Diseqc switch with vol /vol-keys, also if you don’t want to use Diseqc, you should select off. If you press ok button after all setting, this will start search channels and another channel name will be appealed on the screen. This will show you the procedure of channels search, after finish network searching, you can select if you will store all searched information or not. If you want to store all searched data, you should select ok keys. 5 delete satellite After moving highlight delete sat icon (menu) and press ok button and you can find out control panel and on his, you can find out satellite list, with this (menu) you can delete your required satellite once you press ok on specific item, information message will be appeared, so if you surely delete that, you should select YES with vol+/vol-and ok key. 6 diseqc1.2 search Diseqc1.2 position setup 1 satellite name: you can select your required satellite with vol+/vol- keys. 2. Tp frequency: you can select your required Tp frequency with numeric keys Polar: you can select proper polarity between Hor .and ver. 3. Move (coarse): In the course of moving the positioned with vol-(to east), if you press ok key on your remote controller that position will be set as east limit. In the course of moving positioned with vol+ or vol-to stop, the dish will be located in the center. In the course of moving the positioned with vol+ (to west), if you press ok key on your remote controller that position will be set as west limit. 4. Move (minute): you can moving positioned minute. 5. Soft limit: if you press ok on east-limit that position will be set as east limit. If you press ok on west-limit that position will be set as east limit. If you press ok on west-limit that position will be set as west limit Ok: you can store specific position on the course of moving positioned with ok key, you can see the below signal bar for storing. Signal: you can see signal quality per selection of above parameters. After above procedure, you should vase with pressing menu button On remote control Unit., if you not press menu button, adjusted Information will not be stored. To add /edit satellite Information of Tp number frequency, symbol rate, polarity and 22 kHz, Diseqc. You can use this menu. In this menu you can newly add 20 satellites to existing satellite data. After moving highlight on add transponder and edit menu icon and press ok button and you can find out below parameter. 1. Sat name: you can select memorized sat. Name with vol+ /vol- keys. Lnb frequency: you can select Lnb frequency between universal and single. If you select single Lnb, you can see only single Lnb frequency. But if select universal Lnb, you can see universal. 2tp frequency: you can insert new Tp frequency with numeric keys 3symbol rate: you can insert new symbol rate with numeric keys 4polar: you can select Tp polarity between ver. and hor. With vol+/vol- keys. 5 22 kHz tone: if you want to us this switch, you should select no or if not, you should select off 6 Diseqc: you can select your available Diseqc switch with vol+/vol- keys, also if you don’t want to use Diseqc you should select off. If you want reserve all adjusted data, you should save it by pressing (Menu) button. And you can add and edit you required tp. After you moving the highlight on prog edit menu icon, you can find out the below 4sud –menu like choose fav prog, move prog, Delete prog, prog edit. In this menu you can effect manual searching. 3-1fav prog You can select the channel you would like to watch by moving the highlighted bar to the channel of your choice with ch+/ch-and then pressing ok, you can select the TV or radio channel list by using use fav key for selecting the favorite channel list. 3-2 move prog You can move the channel to the position you required, press ok on the remote controller, then the present channel color will be changed. At this time, change channel position by using ch+/ch-button on the remote controlled. 3-3 delete program After you moving the highlight on program menu icon and press ok, then the present channel color will be change and enter ok by using X for delete the program you selected. 3-4prog edit With the menu, you can do (manual search) If you want to search new channel which are not insertion in memorized satellite data, you can search them with manual insertion of specific data like video PID, and Audio PID and PCR PID. 3-4-1 Program No: you can insert channel name on with vol+/vol-keys 3-4-2 program name: you can insert channel name on alphabet letter panel 3-4-3 sat name: you can select sat with vol+/vol-keys 3-4-4 Lnb frequency: you can select Lnb between Universal and single 3-4-5 22 kHz: you can select this switch ON or OFF 3-4-6 Diseqc: you can select your available Diseqc switch with Vol+/vol-keys, also if you don’t want to use Diseqc, you Should select off. 3-4-7 Tp frequency: you can insert your required Tp frequency with numeric keys 3-4-8 symbol: you can insert your required symbol rate with Numeric keys. 3-4-9 video PID: you can insert video PID with Numeric keys 3-4-10 Audio PID: you can insert Audio PID with Numeric keys 3-4-11 pcr PID: you can insert pcr PID with Numeric keys After above procedure, you should save that data with pressing of Menu button, if not, adjusted data will not be saved and return to Existing data… (Game) After moving highlight on Russian or snake menu and press ok, you Can go into game… After moving highlight on calendar menu icon and press, ok it Will show you calendar. (System setup) After moving highlight on System menu icon and press, ok Button and you can find out 6 kinds of sub-menu like TV Stared and/ Language/Factory default// System update//osd setting/picture Setting. In this menu, you can set the system up as your requirement. 5-1tv standard After moving highlight on TV standard menu and press ok button And you can find out below parameter. In this menu, you can select proper TV standard. 5-1-1tv standard: you can select you required TV standard between Auto, pal and ntsc mode with vol+/vol- keys. 5-1-2 if the receiver is connected to the TV by an RF lead, you can Select the RF modulator channel, Chanel 38 is the default factory Setting for the channel to which you’re TV must be set in order to View the output of your receiver if this channel is currently being Used as a broadcast channel or if your are getting interference on this Channel, you may change the channel to an unused number and Change your TV to that channel in order to view the output. If you Get picture but no sound, the RF audio type might be wrong. 5-1-3 with this tuning you can select available system among various Broadcasting systems like pal-bg, pal-i.pal-m.and ntsc-m, auto With vol+/vol-and ok keys. 5-2 (language) After moving highlight line on language setup (menu) and press Ok button and you can find out parameters, with this set-up, You can select required language list. 5-3 (factory default) After moving highlight on factory rest menu icon and press ok Button and you can find out below parameter, In this (menu), you can make all data as factory default status. 1. Factory: if you want to make all data as factory default status. Please (select resume) the default value or if not .select cancel With vol+/vol-. 5-4 (system update) After moving highlight on system update menu icon and press Button and you can find out all program information in the master Receiver can be transferred to the next (slave) receiver using this Function 5-4-1.connect a serial cable between the two receivers 5-4-2.select the mode of transfer you wish using the key, you can Choose all/code/code &list/logo. 5-4-3.power on the slave receiver 5-4-4.once the data transfer is complete, a message will appear Informing you that the transfer was successful. If and error Message appears, you will need to start the transfer process over again. 5-4-5.if you are updating multiple receivers. Transfer the serial the Serial cable to the next receiver and power on that receiver. 5-5(osd setting) After moving highlight on osd setting menu and press ok button And you can find out below parameter. 1. Osd style 1-4: you can select you favorite osd color among Four styles with vol+/vol- and you should save with pressing Menu button. After moving highlight on osd transpire (menu) and press ok button And you can find out below parameter. You can select proper osd transpare ratio with in 30%-100% level. 1.30%-100%: you can select your required osd transpare quality Within 30%-100% with vol+/vol- keys and save with this pressing Menu button. 5-6 (picture setting) After moving highlight on picture setting menu and press ok button And you find out the below parameter. 1. light/red/blue, you can select your favorite picture color with Ok button and should save with menu and you also can resume Default. After moving highlight on prog list menu icon, you can find out Like TV list, radio list TV favorite list, radio favorite list. When you press ok, you can directly see the channel list You can select the channels you would like to watch by moving the Highlight bar to the channels of your choice using and ch+/ch- And then press ok, you select the TV or radio channels list by fav Key for select the favorite channels list. (Special function) (Zoom in /out) You can select Zoom keys in a normal mode to Effect zoom in and zoom out function. Epg (electronic program guide) You can press epg key button on the live mode. Epg of the current channel appears on the screen. (Channel information) Every time you press I, the program Information will be displayed for a few seconds The information may include: 1) Current time 2) Channel name 3) Information about the current program (Volume control) To control the volume, vol+/vol- keys on The rcu The volume indicator will show for a few Second before automatically disappearing. (Change channels) You may change the channel by simple Entering the channel number using your Rcu0-9 keys, you may use + - keys on the Rcu and /or the front panel of the receiver. (Multi picture) The multi picture will display when you Press + key, and you can select one picture To watch with ok keys. (Rename) Key usage: confirm the letter you selected and Returned to the user preferences You can select the desired satellite name simple Suing ok keys on the remote controller, then you Can see the alphabet pane, and you selected Ch+/ch-, vol+/vol-to select letter, 1) Ck key: cancel your selected the letter and return To the user preferences 2) Back key: return to the channel viewing mode 3) < >: change the setting got the selected item Input Connector: F-type, iec 169-24, female Frequency Range: 950 MHz to 2150 MHz Input impedance: 750hm…unbalanced Signal level:-25 to -65 dbm If Frequency: 480 MHz If band width: 36 MHz Lnb power & polarization: vertical: +13 Horizontal: +18 V Current: 600ma maxes overload protection 22 kHz tone: Frequency: 22 kHz + 4 kHz Amplitude:0.6V+0.2V Diseqc control: Version 1.0/1.2 compatible Demodulation: QPSK Input symbo1: Rate: 2-45 ms/s FEC Décoder: convolution code Rate 1/2,2/3,3/4, FEC 5/6 and 7/8 with constraint length k=7
Posted on: Wed, 26 Jun 2013 22:03:25 +0000
Trending Topics
Recently Viewed Topics
© 2015